LOW AND MIDDLE PRESSURE FANS (AB & AB-T Type)

APPLICATIONS

Suitable to ventilate technical, industrial and commercial premises in general, particularly preferred for aspiration of clean and slightly dusty air.

GENERAL SPECIFICATIONS

  • While AB series is manufactured up to 15.000 m³/h and 180 mmWG; AB-T series is supply up to 100.000 m³/h and 150 mmWG.
  • AB series are direct driven and AB – T series are belt driven.

CONSTRUCTION (FAN CASING)

All parts of centrifugal fans are formed from the ST37 (S235JR) (EN10025) steel sheets with integral supports except special applications. The grey (RAL 7038) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available.

IMPELLER

The impeller is forward curved in AB & AB-T series. 
Static and dynamic vibration defects recovered after production according to appropriate ISO norm.
Rotation of fans are signed on casing.

ELECTRIC MOTORS

380 V – 50 Hz (standard), 400 / 415 / 440 V – 50 Hz and other voltage and frequencies on request. The standard motors are Class F, S1, IP55.

ACCESSORIES

You can use following accessories with AB & AB-T Models: